What’s new?

Check the repo NEWS file to be up to date with the new features, improvements, bug fixes affecting the package.

How to install

# From bioconductor:
BiocManager::install(c("ComplexHeatmap", "org.Mm.eg.db"))

# From CRAN:
install.packages(c("factoextra", "FactoMineR", "gProfileR", "PerformanceAnalytics"))

install.packages("devtools")
library(devtools)
install_github("biodavidjm/artMS")

library(artMS)

## 

Input files

artMS performs the different analyses taking as input the following files:

• evidence.txt file: output of the quantitative proteomics software package MaxQuant.
• keys.txt (tab-delimited) txt file generated by the user describing the experimental design.
• contrast.txt (tab-delimited) txt file generated by the user with the comparisons between conditions to be quantified.

Check below to find out more about generating the input files.

Configuration file

artmsQuantification() requires a large number of arguments, specially those related to the statistical package MSstats. To facilite the task of providing all those arguments, the function artmsQuantification() takes a config file (in yaml format) for the customization of the parameters for quantification (using MSstats) and other operations, including QC analyses, charts, and annotations.

A configuration file template can be generated by running artmsWriteConfigYamlFile()

Check below to learn the details of the configuration file.

Basic workflows

Input files

Three basic (tab-delimited) files are required to perform the full pack of operations:

HSC6-Cal_33

WT_DRUG_A-WT_A549
WT_DRUG_B-WT_A549
WT_DRUG_A-WT_DRUG_B

# WRONG:
HSC6-Cal_33-1

The artMS configuration file

IMPORTANT

Before you begin, please, set the working directory. artMS will work from that working directory. For example:

setwd("/path/to/my/working_directory/project_proteomics/")

Most of the artMS functions will create sub-folders to output files assuming that this working directory has been set and will try to find all the required files in this working directory.

The configuration file (in yaml format) contains a variety of options available for the QC, quantification, and annotations performed by artMS.

To generate a sample configuration file, go to the project folder (setwd(/path/to/my/working_directory/project_proteomics/)) and execute:

library(artMS)
artmsWriteConfigYamlFile(config_file_name = "my_config.yaml")

Open the my_config.yaml file with your favorite editor (RStudio for example).

Note: Although the configuration file might look complex, the default options work very well.

The configuration (yaml) file contains the following sections:

`-- data
    |-- projectx-contrasts.txt
    |-- projectx-evidence.txt
    `-- projectx-keys.txt

files :
  evidence : data/projectx-evidence.txt
  keys : data/projectx-keys.txt
  contrasts : data/projectx-contrast.txt
  summary: data/projectx-summary.txt # Optional
  output : results_folder/projectx--results.txt # this will be created

qc:
  basic: 1 # 1 = yes; 0 = no
  extended: 1 # 1 = yes; 0 = no
  extendedSummary: 0 # 1 = yes; 0 = no

data:
  enabled : 1 # 1 = yes; 0 = no
  silac: 
    enabled : 0 # 1 for SILAC experiments
  filters: 
    enabled : 1
    contaminants : 1
    protein_groups : remove # remove, keep
    modifications : AB # PH, UB, AC, AB, APMS
  sample_plots : 1 # correlation plots

msstats :
  enabled: 1 
  msstats_input:
  profilePlots: none 
  normalization_method: equalizeMedians  
  normalization_reference:
  summaryMethod: TMP 
  MBimpute: 1 
  feature_subset: all 
  n_top_feature: 3 
  logTrans: 2 
  remove_uninformative_feature_outlier: FALSE 
  min_feature_count: 2
  equalFeatureVar: TRUE
  censoredInt: NA
  remove50missing: FALSE
  fix_missing: NULL
  maxQuantileforCensored: 0.999
  use_log_file: TRUE
  append: FALSE
  log_file_path: NULL

  enabled : 1 # if 0, won't process anything on this section
  annotate :  
    enabled: 1 
    species : HUMAN
  plots:
    volcano: 1
    heatmap: 1
    LFC : -0.58 0.58 # Range of minimal log2fc
    FDR : 0.05 # adjusted p-value, false discovery rate
    heatmap_cluster_cols : 0
    heatmap_display : log2FC # log2FC or pvalue

Special case: Protein fractionation

To handle protein fractionation experiments, one additional column “Fraction” must be added to the keys.txt file with the information about fractions. For example:

Deprecated: In previous versions of artMS (v <= 1.9), the config.yaml file contained an additional fractions section that had to be activated as follow:

fractions: 
  enabled : 1 # 1 for protein fractions, 0 otherwise

This option is not longer required, as artMS will use the “Fraction” of the keys file to detect that multiple fractions are available.

Special case: SILAC

One of the most widely used techniques that enable relative protein quantification is stable isotope labeling by amino acids in cell culture (SILAC). The keys.txt file can capture the typical SILAC experiment. The following example shows a SILAC experiment with two conditions, two biological replicates, and two technical replicates:

It is also required to activate the silac option in the yaml file as follows:

silac: 
  enabled : 1 # 1 for SILAC experiments

Basic QC (evidence.txt-based)

The basic quality control analysis takes as input both the evidence.txt and keys.txt files and generates several QC plots exploring different aspects of the MS data. Run it as follows:

artmsQualityControlEvidenceBasic(
  evidence_file = artms_data_ph_evidence,
  keys_file = artms_data_ph_keys,
  prot_exp = "PH")

The following pdf can be generated:

• plotCORMAT (qcBasic_evidence.qcplot.CorrelationMatrix.pdf) (default): Correlation matrix for technical replicates (if available), biological replicates, and conditions based on MS Intensity values
• plotCORMAT (qcBasic_evidence.qcplot.CorrelationMatrixCluster.pdf (default): Clustered version of the Correlation matrices as for .CorrelationMatrix.pdf
• plotINTMISC (qcBasic_evidence.qcplot.IntensityStats.pdf): several pages, including bar plots of Total Sum of Intensities in BioReplicates, Total Sum of Intensities in Conditions, Total Peptide Counts in BioReplicates,
  Total Peptide Counts in conditions grouped by categories (CON: contaminants, PROT peptides, REV reversed sequences used by MaxQuant to estimate the FDR); Box plots of MS Intensity values per biological replicates and conditions; bar plots of total intensity (excluding contaminants) by bioreplicates and conditions; Bar plots of total feature counts by bioreplicates and conditions.
• plotPTMSTATS (qcBasic_evidence.qcplot.PTMStats.pdf): If any PTM is selected (PH, UB, AC, PTM:##) an extra pdf file will be generated with stats related to the selected modification, including: *bar plot of peptide counts and intensities*, broken byPTM/other` categories; bar plots of total sum-up of MS intensity values by other/PTM categories.
• plotREPRO (qcBasic_evidence.qcplot.BasicReproducibility): correlation dot plot for all the combinations of biological replicates of every condition, based on MS Intensity values of features (peptide+charge)
• plotINTDIST (qcBasic_evidence.qcplot.IntensityDistributions.pdf): 2 pages. Box-dot plot and Jitter plot of MS (raw) intensity values for each biological replicate.

Check ?artmsQualityControlEvidenceBasic() to find out more options. Remember: by default, all the plots are printed to a pdf file by running:

artmsQualityControlEvidenceBasic( 
    evidence_file = artms_data_ph_evidence,
    keys_file = artms_data_ph_keys,
    prot_exp = "PH", 
    plotPTMSTATS = TRUE,
    plotINTDIST = FALSE, plotREPRO = FALSE,
    plotCORMAT = FALSE, plotINTMISC = FALSE,
    printPDF = FALSE, verbose = FALSE)

## Warning: The dot-dot notation (`..prop..`) was deprecated in ggplot2 3.4.0.
## ℹ Please use `after_stat(prop)` instead.
## ℹ The deprecated feature was likely used in the artMS package.
##   Please report the issue at <https://github.com/biodavidjm/artMS/issues>.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was generated.

## Warning: The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?
## The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?

## Warning: The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?
## The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?
## The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?
## The following aesthetics were dropped during statistical transformation: fill.
## ℹ This can happen when ggplot fails to infer the correct grouping structure in the data.
## ℹ Did you forget to specify a `group` aesthetic or to convert a numerical variable into a factor?

Extended QC (evidence.txt-based)

It takes as input the evidence.txt and keys.txt files as follows:

artmsQualityControlEvidenceExtended(
   evidence_file = artms_data_ph_evidence,
   keys_file = artms_data_ph_keys)

and generates the following QC plots:

• plotCS (qcExtended_evidence.qcplot.ChargeState): charge state distribution of PSMs confidently identified in each BioReplicate.

• plotIC (qcExtended_evidence.qcplot.PCA.pdf): pairwise intensity correlation and Principal Component Analysis (PCA)

  • Page 1 and 3: pairwise peptide and protein intensity correlation and scatter plot between any 2 BioReplicates, respectively.
  • Page 2 and 4: principal component analysis at the intensity level for both peptide and proteins, respectively.

• plotIONS (qcExtended_evidence.qcplot.Ions.pdf): A peptide ion is defined in the context of m/z, in other words, a unique peptide sequence may give rise to multiple ions with different charge state and/or amino acid modification.

  • Page 1: number of ions confidently identified in each BioReplicate (top panel: non-contaminants, bottom: contaminants)
  • Page 2: mean number of peptide ions per condition with error bar showing the standard error of the mean (categories: non-contaminants / contaminants)

• plotME (qcExtended_evidence.qcplot.MassError.pdf): Distribution of precursor error for all PSMs confidently identified in each BioReplicate.

• plotMOCD (qcExtended_evidence.qcplot.MZ.pdf): Distribution of precursor mass-over-charge for all PSMs confidently identified in each BioReplicate.

• plotPIO (qcExtended_evidence.qcplot.PepIonOversampling.pdf):

  • Page 1: proportion of all peptide ions (including peptides matched across runs) fragmented once, twice and thrice or more.
  • Page 2: proportion of peptide ions (with intensity detected) fragmented once, twice and thrice or more.
  • Page 3: proportion of peptide ions (with intensity detected and MS/MS identification) fragmented once, twice, and 3 or more

• plotPEPDETECT (qcExtended_evidence.qcplot.PeptideDetection.pdf): frequency of peptide detection across BioReplicates by condition, showing the percentage of peptides detected once, twice, thrice, and so on (based on the number of bioreplicates for each condition).

• plotPEPICV (qcExtended_evidence.qcplot.PeptideIntensity.pdf): Peptide intensity coefficient of variance (CV) plot.
  The CV is calculated for each feature (peptide ion) identified in more than one replicate.

  • Page 1 shows the distribution of CV’s for each condition, while
  • Page 2 shows the distribution of CV’s within 4 bins of intensity (i.e., 4 quantiles of average intensity).

• plotPEPTIDES (qcExtended_evidence.qcplot.Peptides.pdf): peptide statistics plot.

  • Page 1: number of unique peptide sequences (disregards the charge state or amino acid modifications) confidently identified in each BioReplicate (top panel: non-contaminants, bottom: contaminants)
  • Page 2: mean number of peptides per condition with error bar showing the standard error of the mean.

• plotPEPTOVERLAP (qcExtended_evidence..qcplot.PeptidesOverlap.pdf): peptide overlaps across bioreplicates (page 1) and conditions (page 2)

• plotPROTDETECT (qcExtended_evidence.qcplot.ProteinDetection.pdf): Protein detection frequency plot:

  • Page 1: protein group frequency of detection across BioReplicates for each condition, showing the percentage of proteins detected per bioreplicates
  • Page 2: feature (peptide ion) intensity distribution within each BioReplicate (potential contaminant proteins are plot separately).
  • Page 3: density of feature intensity for different feature types (i.e., MULTI-MSMS, MULTI-SECPEP).

• plotPROTICV (qcExtended_evidence.qcplot.ProteinIntensityCV.pdf): protein intensity coefficient of variance (CV) plot. The CV is calculated for each protein (after summing the peptide intensities) identified in more than one replicate.

  • Page 1: istribution of CV’s for each condition
  • Page 2: distribution of CV’s within 4 bins of intensity (i.e., 4 quantiles of average intensity).

• plotPROTEINS (qcExtended_evidence.qcplot.Proteins.pdf): protein statistics,

  • Page 1: number of protein groups confidently identified in each BioReplicate.
  • Page 2: mean number of protein groups per condition with error bar showing the standard error of the mean (categories: non-contaminants / contaminants)

• plotPROTOVERLAP (qcExtended_evidence..qcplot.ProteinOverlap.pdf): Protein overlap across bioreplicates (page 1) and conditions (page 2)

• plotPSM (qcExtended_evidence.qcplot.PSM.pdf) : Peptide-spectrum-matches (PSMs).

  • Page 1: number of PSMs confidently identified in each BioReplicate.
  • Page 2: mean number of PSMs per condition with error bar showing the standard error of the mean (categories: non-contaminants / contaminants)

• plotIDoverlap (qcExtended_evidence.qcplot.ID-Overlap.pdf): heatmap of pairwise identification overlap:

  • Page 1: peptide identification overlap, only peptides detected and identified between any 2 BioReplicates
  • Page 2: protein identification overlap, only proteins with at least 1 peptide detected and identified between any 2 BioReplicates

• plotSP (qcExtended_evidence.qcplot.SamplePrep.pdf): sample quality metrics.

  • Page 1: missing cleavage distribution of all peptides confidently identified in each BioReplicate.
  • Page 2: fraction of peptides with at least one methionine oxidized in each BioReplicate.

• plotTYPE (qcExtended_evidence.qcplot.Type.pdf): identification type. MaxQuant classifies each peptide identification into different categories (e.g., MSMS, MULTI-MSMS, MULTI-SECPEP). This plot shows the distribution of identification type in each BioReplicate

Examples: printing plotTYPE, plotPEPICV, and plotPCA plots only:

artmsQualityControlEvidenceExtended(
  evidence_file = artms_data_ph_evidence,
  keys_file = artms_data_ph_keys,
  plotPCA = TRUE,
  plotTYPE = TRUE,
  plotPEPTIDES = TRUE,
  plotPSM = FALSE,
  plotIONS = FALSE,
  plotPEPTOVERLAP = FALSE,
  plotPROTEINS = FALSE,
  plotPROTOVERLAP = FALSE,
  plotPIO = FALSE,
  plotCS = FALSE,
  plotME = FALSE,
  plotMOCD = FALSE,
  plotPEPICV = FALSE,
  plotPEPDETECT = FALSE,
  plotPROTICV = FALSE,
  plotPROTDETECT = FALSE,
  plotIDoverlap = FALSE,
  plotSP = FALSE,
  printPDF = FALSE,
  verbose = FALSE)

## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter

## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter
## Warning in par(usr): argument 1 does not name a graphical parameter

Extended QC (summary.txt based)

It requires two files:

• keys.txt file
• MaxQuant summary.txt file. As described by MaxQuant’s table.pdf, the summary file contains summary information for all the raw files processed with a single MaxQuant run, including statistics on the peak detection. The QC analysis of this file gathers a quick overview on the quality of every RawFile based on this summary.txt. Run it as follows:

artmsQualityControlSummaryExtended(summary_file = "summary.txt",
                                    keys_file = artms_data_ph_keys)

It generates the following pdf plots:

• plotMS1SCANS (.qcplot.MS1scans.pdf): generates MS1 scan counts plot: Page 1 shows the number of MS1 scans in each BioReplicate. If replicates are present, Page 2 shows the mean number of MS1 scans per condition with error bar showing the standard error of the mean. If isFractions is TRUE, each fraction is a stack on the individual bar graphs.

• plotMS2 (.qcplot.MS2scans.pdf): generates MS2 scan counts plot: Page 1 shows the number of MSs scans in each BioReplicate. If replicates are present, Page 2 shows the mean number of MS1 scans per condition with error bar showing the standard error of the mean. If isFractions is TRUE, each fraction is a stack on the individual bar graphs.

• plotMSMS (.qcplot.MSMS.pdf): generates MS2 identification rate (%) plot: Page 1 shows the fraction of MS2 scans confidently identified in each BioReplicate. If replicates are present, Page 2 shows the mean rate of MS2 scans confidently identified per condition with error bar showing the standard error of the mean. If isFractions TRUE, each fraction is a stack on the individual bar graphs.

• plotISOTOPE (.qcplot.Isotope.pdf): generates Isotope Pattern counts plot: Page 1 shows the number of Isotope Patterns with charge greater than 1 in each BioReplicate. If replicates are present, Page 2 shows the mean number of Isotope Patterns with charge greater than 1 per condition with error bar showing the standard error of the mean. If isFractions TRUE, each fraction is a stack on the individual bar graphs.

Quantification of Changes in Global Protein Abundance

The quantification of changes in protein abundance between different conditions requires to fill up the following sections of the config file:

files:
  evidence : /path/to/the/evidence.txt
  keys : /path/to/the/keys.txt
  contrasts : /path/to/the/contrast.txt
  output : /path/to/the/output/results_ptm_global/results.txt
  .
  .
  .
data:
  .
  .
  .
  filters:
    modifications : AB 

The remaining options can be left unmodified (and run the default parameters). Then run the following artMS function:

artmsQuantification(
  yaml_config_file = '/path/to/config/file/artms_ab_config.yaml')

Quantification of Changes in Global Phosphorylation, Ubiquitination, Acetylation (or any PTM)

Warning: This quantification is only possible for experiments that have used methods to enrich for the modified peptides (e.g. phosphorylation) prior to the mass spectrometry analysis.

The global PTM quantification analysis calculates changes of the PTM at the protein level. This means that all the modified peptides for every protein are used to quantify changes in protein phosphorylation, ubiquitination, or acetylation between different conditions. The site-specific analysis (explained next) would quantify changes at the site level, i.e., each modified peptide for every PTM site is / are quantified independently between the different conditions (one or more different peptides could be detected for the same PTM)

Only two sections need to be filled up using the default configuration file:

files:
  evidence : /path/to/the/evidence.txt
  keys : /path/to/the/keys.txt
  contrasts : /path/to/the/contrast.txt
  output : /path/to/the/output/results_ptm_global/results.txt
  .
  .
  .
data:
  .
  .
  .
  filters:
    modifications : PH

The remaining options can be left unmodified.

Once the configuration yaml file is ready, run the following command:

artmsQuantification(
  yaml_config_file = '/path/to/config/file/artms_phglobal_config.yaml')

PTM-Site/Peptide-specific Quantification of Changes (PH, UB, AC)

Warning: This quantification is only possible for experiments that have used methods to enrich phosphopeptides or ubiquitinated peptides prior to the mass spectrometry analysis.

Abbreviations:

• PH = Protein phosphorylation
• UB = Protein Ubiquitination
• AC = Protein Acetylation
• PTM:XXX:yy : User defined PTM (any PTM supported by MaxQuant). Replace XXX with 1 or more 1-letter amino acid codes on which to find modifications (all uppercase). Replace yy with modification name used within the evidence file (require lowercase characters). Example: PTM:STY:ph will find modifications on aa S,T,Y with this example format _AAGGAPS(ph)PPPPVR_

The site-specific analysis quantifies changes at the modified peptide level. This means that changes in every modified (PH, UB, AC, or PTM) peptide of a given protein will be quantified individually. The caveat is that the proportion of missing values should increase in general relative to a typical non-PTM global analysis (protein global abundance quantification). Both sites and global ptm analysis are highly correlated due to the usually only one or two peptides drive the overall changes in PTMs for every protein.

To run a site/peptide specific analysis follow these steps:

1. Important pre-processing step on the evidence file to enable the ptm-site/peptide-specific analysis. This step takes any of the Proteins id columns selected by the user (either Leading razor protein, Leading protein, or Proteins) and re-annotates it to incorporate the ptm-site/peptide-specific information. By default, this function converts the column Leading razor protein. This step is computational expensive, which means that it might take several minutes to finish (depending on the size of the fasta database, evidence file, computer power, etc)

It also requires the same reference proteome (fasta sequence database) used for the MaxQuant search.

For phosphorylation:

artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", 
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/output/ph-sites-evidence.txt", 
  mod_type = "PH")

As a result, the IDs in the “Leading razor protein” column will contain site/peptide-specific notation. For example:

Before: P12345 After: P12345_S23_S45

For ubiquitination:

artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", 
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/output/ub-sites-evidence.txt", 
  mod_type = "UB")

For acetylation:

artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", 
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/output/ac-sites-evidence.txt", 
  mod_type = "AC")

For all PTMS supported by MaxQuant (in addition to PH, AC, UB):

Example with PH and UB:

# Phosphopeptide in evidence file: `_AAGGAPS(ph)PPPPVR_`
artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", 
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/output/ac-sites-evidence.txt", 
  mod_type = "PTM:STY:(ph)")

# Ubiquitinated peptide: `_AAASK(gl)LGEFAK_`
artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", 
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/output/ac-sites-evidence.txt", 
  mod_type = "PTM:K:(gl)")

Tip: How to re-annotate all the Protein columns on the same file.

By default, artmsProtein2SiteConversion doesn’t allow to overwrite the evidence.txt file for security reasons (you don’t want to lose the evidence file if something goes wrong). To overwrite the evidence file the argument overwrite_evidence must be turned on (overwrite_evidence = TRUE).

If the column_name argument is not used, artmsProtein2SiteConversion converts the Leading razor protein column, which is used in the quantification step when protein_groups : remove is selected (default). However, if protein_groups : keep is used, artMS will use the Proteins column. To convert the Proteins column to the site/peptide-specific notation, then add the argument column_name = "Proteins".

To annotate both columns of the same file, first generate the “site-evidence.txt” file, and then use this same output file as the evidence_file and activate overwrite.evidence = TRUE.

In summary, to annotate both the “Leading razor protein” and Proteins columns follow these steps:

# Convert 'Leading razor protein' evidence's file column
artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/evidence.txt", # ORIGINAL
  column_name = "Leading razor protein",
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/phsites-evidence.txt", # SITES VERSION
  mod_type = "PH")

# Convert 'Proteins' evidence's file column
artmsProtein2SiteConversion(
  evidence_file = "/path/to/the/phsites-evidence.txt", # <- USE SITES VERSION
  column_name = "Proteins",
  overwrite_evidence = TRUE, # <--- TURN ON
  ref_proteome_file = "/path/to/the/reference_proteome.fasta", 
  output_file = "/path/to/the/phsites-evidence.txt", # <- SITES VERSION
  mod_type = "PH")

2. Generate a new configuration file (phsites_config.yaml or ubsites_config.yaml) as explained above, but using the “new” sites-evidence.txt file instead of the original evidence.txt file:

files:
  evidence : /path/to/the/evidence-site.txt
  keys : /path/to/the/keys.txt
  contrasts : /path/to/the/contrast.txt
  output : /path/to/the/output/results_ptmSITES/sites-results.txt # <- this one
  .
  .
  .
data:
  .
  .
  .
  filters:
    modifications : PH # <- Don't forget this one.

Once the new yaml file has been created, execute:

artmsQuantification(
  yaml_config_file = '/path/to/config/file/phsites_config.yaml')

Output files

The files generated after succesfully running artmsQuantification are (based on MSstats documentation):

Inputs

It takes as input two files generated from the previous quantification step (artmsQuantification())

• -results.txt : MSstats quantification results
• -results_ModelQC.txt : MSstats abundance values. It will be used to extract details about reproducibility.

To run this analysis:

1. Set as the working directory the folder with the results obtained from artmsQuantification().

setwd('~/path/to/the/results_quantification/')

And then run the following function (e.g., for a protein abundance “AB” experiment)

artmsAnalysisQuantifications(log2fc_file = "ab-results.txt",
                              modelqc_file = "ab-results_ModelQC.txt",
                              species = "human",
                              output_dir = "AnalysisQuantifications")

A few comments on the available options for artmsAnalysisQuantifications:

• isPTM: two options:
  • "noptm": use for protein abundance (AB), Affinity Purification-Mass Spectrometry (APMS), and global analysis of posttranslational modifications (PH, UB, AC) use the option .
  • "ptmsites": use for site specific PTM analysis.
• species: this downstream analysis supports (for now) "human" and "mouse" only.
• outliers: outliers can be kept (default) or could be removed from the abundance data. Options:
  • keep: keeps the outliers
  • iqr: removes any outlier outside +/- 6 x interquartile range from the mean (recommended)
  • std: it removes any outliers outside +/- 6 x the standard deviation from the mean
• enrich: If TRUE, it will perform enrichment analysis using gProfileR
• isBackground. If enrich = TRUE, the user can provide a background gene list (add the file path as well)
• mnbr: PARAMETER FOR NAIVE IMPUTATION. Minimal number of biological replicates for “naive imputation” and filtering. Default: mnbr = 2. Details: Intensity values for proteins/PTMs that are completely missed in one of the two conditions compared (“condition A”), but are found in at least 2 biological replicates (mnbr = 2) of the other “condition B”, are imputed (values artificially assigned) and the log2FC values calculated. The goal is to keep those proteins/PTMs that are consistently found in one of the two conditions (in this case “condition B”) and facilitate the inclusion in downstream analysis (if wished). The imputed intensity values are sampled from the lowest intensity values detected in the experiment, and (WARNING) the p-values are just randomly assigned between 0.05 and 0.01 for illustration purposes (when generating a volcano plot with the output of artmsAnalysisQuantifications) or to include them when making a cutoff of p-value < 0.05 for enrichment analysis or similar. CAUTION: mnbr would also add the constraint that any protein must be identified in at least nmbr biological replicates of the same condition or it will be filtered out. That is, if mnbr = 2, a protein found in two conditions but only in one biological replicate in each of them, it would be removed.

Outputs

Summary file (summary.xlsx)

Reminder: for any given relative quantification, as for example WT-Mutant:

• Proteins with positive log2fc values (i.e. log2fc > 0) are more abundant in the condition on the left / numerator (WT)
• Proteins with negative log2fc values (i.e. log2fc < 0) are more abundant in the condition on the right / denominator (Mutant)

The summary excel file (results-summary.xlsx) gathers several tabs:

• log2fcImputed: includes quantitative results.
  • Self-defining columns: Protein, Gene, ProteinName, EntrezID, Comparison, log2FC, pvalue, adj.pvalue.
  • Not self-defining columns:
    • imputed (yes/no) indicates whether the iLog2FC value has been imputed according to the nmbr criteria (see above)
    • iLog2FC, iPvalue: in addition to the model based log2fc and pvalues, these columns include imputed log2fc and pvalues (when completely missed in one of the conditions), followed by as many columns as the number of conditions, indicating the number of biological replicates in which each protein/ptmsite was identified.
    • CMA stands for “Condition Most Abundant”, i.e. condition in which each protein was found more abundantly (based on the log2fc).
• wide_iLog2fc: log2fc values (including imputed values) in wide format, i.e., each row is a unique protein/ptmsite. The columns shows the values for each of the comparisons.
• wide_iPvalue: same as before, but for pvalues (including imputed)
• enrichALL: enrichment analysis using GProfileR for all the proteins changing significantly in any direction (ab(log2fc) > 0 and pvalue < 0.05)
• enrich-MACpos: enrichment of only the positive significant changes (log2fc > 1, pvalue < 0.05)
• enirch-MACneg: enrichment of only the negative significant changes (log2fc < -1, pvalue < 0.05)
• enMACallCorum, enMACposCorum, enMACnegCorum: same as above but only for protein complex enrichment analysis (based on CORUM)

Text files

• results-log2fc-long.txt: same as the log2fcImputed tab from the summary file
• results-log2fc-wide.txt: wide version (i.e., each row is an individual protein) of pvalues and adj.pvalues for each comparison

Gene Enrichment analysis: enrichment analysis only supported for human and mouse. Check the GprofileR documentation to find out more about the details:

• results-enrich-MAC-allsignificants.txt: all significant changes (abs(log2fc) > 1 & pvalue < 0.05)
• results-enrich-MAC-positives.txt: only positive significant changes (log2fc > 1 & pvalue < 0.05)
• results-enrich-MAC-negatives.txt: all significant changes (based on p-value only)

Protein Complex Enrichment analysis (based on CORUM)

• results-enrich-MAC-allsignificants-corum.txt

• results-enrich-MAC-positives-corum.txt

• results-enrich-MAC-negatives-corum.txt

• results-enrich-MAC-allsignificants-corum.pdf

• results-enrich-MAC-negatives-corum.pdf

• results-enrich-MAC-positives-corum.pdf

Clustering

• results.clustering.log2fc.all-overview.pdf

• results.clustering.log2fc.all-zoom.pdf

• results.clustering.log2fcSign.all-overview.pdf

• results.clustering.log2fcSign.all-zoom.pdf

• results.log2fc-clusterheatmap-enriched.txt

• results.log2fc-clusterheatmap.txt

• results.log2fc-clusterheatmap.pdf

• results.log2fc-clusters.pdf

Correlations

• results.correlationConditions.pdf
• results.reproducibilityAbundance.pdf
• results.correlationQuantifications.pdf
• results.log2fc-corr.pdf

Miscellaneous

• results.relativeABUNDANCE.pdf

• results.distributions.pdf

• results.distributionsFil.pdf

• results.imputation.pdf

• results.TotalQuantifications.pdf

PCA

Based on relative abundance

• results-pca-pca01.pdf
• results-pca-pca02.pdf
• results-pca-pca03.pdf
• results-pca-pca04.pdf

Based on significant changes

• results.log2fc-dendro.pdf
• results.log2fc-individuals-pca.pdf

Annotate data.frame with Gene Symbol, Name, ENTREZ based on Uniprot IDs

Takes the given columnid (of Uniprot IDs) from the input data.frame, and map the gene symbol, name, and entre id (source: bioconductor annotation packages)

# This example adds annotations to the evidence file available in
# artMS, based on the column 'Proteins'.

evidence_anno <- artmsAnnotationUniprot(x = artms_data_ph_evidence,
                                        columnid = 'Proteins',
                                        species = 'human')

Average Intensity, RT, CR

Taking as input the evidence file, it will summarize and return back the average intensity, average retention time, and the average calibrated retention time for each protein. If a list of proteins is provided, then only those proteins will be summarized and returned. Check ?artmsAvgIntensityRT() to find out more options.

artmsAvgIntensityRT(evidence_file = '/path/to/the/evidence.txt)

Change column name

Changes a given column name in the input data.frame

artms_data_ph_evidence <- artmsChangeColumnName(
                               dataset = artms_data_ph_evidence,
                               oldname = "Phospho..STY.",
                               newname = "PH_STY")

Individual abundance dot plots

Protein abundance dot plots for each unique uniprot id. It can take a long time

artmsDataPlots(input_file = "results/ab-results-mss-normalized.txt",
               output_file = "results/ab-results-mss-normalized.pdf")

Enrichment analysis function

Enrichment analysis based on a data.frame with Gene and Comparison/Label protein (i.e, typical MSstats results)

# The data must be annotated (Protein and Gene columns)
data_annotated <- artmsAnnotationUniprot(
                      x = artms_data_ph_msstats_results,
                      columnid = "Protein",
                      species = "human")
# And then the enrichment
enrich_set <- artmsEnrichLog2fc(
                   dataset = data_annotated,
                   species = "human",
                   background = unique(data_annotated$Gene), 
                   verbose = FALSE)

Enrichment analysis using gProfileR

Function that simplifies enrichment analysis using gProfileR

# annotate the MSstats results to get the Gene name
data_annotated <- artmsAnnotationUniprot(
                                     x = artms_data_ph_msstats_results,
                                     columnid = "Protein",
                                     species = "human")

# Filter the list of genes with a log2fc > 2
filtered_data <- 
unique(data_annotated$Gene[which(data_annotated$log2FC > 2)])

# And perform enrichment analysis
data_annotated_enrich <- artmsEnrichProfiler(
                                   x = filtered_data,
                                   categorySource = c('KEGG'),
                                   species = "hsapiens",
                                   background = unique(data_annotated$Gene))

MaxQuant evidence file to SAINTexpress format

Converts the MaxQuant evidence file to the 3 required files by SAINTexpress. Choose one of the following quantitative MS metrics:

• MS spectral counts (use msspc)
• MS intensities (use msint)

artmsEvidenceToSaintExpress(evidence_file = "/path/to/evidence.txt", 
                            keys_file = "/path/to/keys.txt", 
                            ref_proteome_file = "/path/to/org.proteome.fasta")

MaxQuant evidence file to SAINTq format

Converts the MaxQuant evidence file to the required files by SAINTq. The user can filter based on either peptides with spectral counts (use msspc) or all the peptides (use all) for the analysis. The quantitative metric can be also chosen (either MS intensity or spectral counts)

artmsEvidenceToSAINTq(evidence_file = "/path/to/evidence.txt", 
                      keys_file = "/path/to/keys.txt", 
                      output_dir = "saintq_input_files")

Generate Phosfate input file

It generates the Phosfate input file from the imputedL2fcExtended.txt file resulting from running the artmsAnalysisQuantifications() on a ph-site quantification (see above). Notice that the only species suported by PHOTON is humans.

artmsPhosfateOutput(inputFile = "your-imputedL2fcExtended.txt")

Generate Photon input file

It generates the Photon input file from the imputedL2fcExtended.txt file resulting from running the artmsAnalysisQuantifications() on a ph-site quantification (see above). Please, notice that the only species suported by PHOTON is humans.

artmsPhotonOutput(inputFile = "your-imputedL2fcExtended.txt")

Remove contaminants and empty proteins from the MaxQuant evidence file

Remove contaminants and erroneously identified ‘reverse’ sequences by MaxQuant, in addition to empty protein ids

evidencefiltered <- artmsFilterEvidenceContaminants(x = artms_data_ph_evidence)

Generate ph-site specific evidence file

Generate extended detailed ph-site file, where every line is a ph site instead of a peptide. Therefore, if one peptide has multiple ph sites it will be breaking down in multiple extra lines for each of the sites.

artmsGeneratePhSiteExtended(df = dfobject, 
                            species = "mouse", 
                            ptmType = "ptmsites",
                            output_name = log2fc_file)

Convert Metabolomics

Pre-process the markview .txt file to generate an “evidence-like” file by running:

artmsConvertMetabolomics(input_file = "markview-output.txt", 
                         out_file = "metabolomics-evidence.txt")

QC Metabolomics

Perform quality control analysis on the metabolomics data by running:

artmsQualityControlMetabolomics(evidence_file = "metabolomics-evidence.txt",
                                keys_file = "metabolomics-keys.txt")

It generates the following plots:

• plotINTDIST.pdf contains both Box-dot plot and Jitter plot of biological replicates based on MS (raw) intensity values.
• plotREPRO.pdf correlation dotplot for all the combinations of biological replicates of conditions, based on MS Intensity values using features (mz_rt+charge)
• plotCORMAT.pdf, includes up to 3 pdf files for technical replicates, biological replicates, and conditions. Each pdf file contains:
  • Correlation matrix for all the biological replicates using MS Intensity values,
  • Clustering matrix of the MS Intensities and correlation distribution
  • histogram of the distribution of correlations
• plotINTMISC.pdf the pdf contains several pages, including bar plots of Total Sum of Intensities in BioReplicates, Total Sum of Intensities in Conditions, Total Feature Counts in BioReplicates, Total Feature Counts in conditions separated by categories (INT: has a intensity value NOINT: no intensity value ) Box plots of MS Intensity values per biological replicates and conditions; bar plots of total intensity by bioreplicates and conditions; Barplots of total feature counts by bioreplicates and conditions.

Relative Quantification:

The relative quantification is performed using MSstats. It requires a configuration file (yaml format, please check above). A template can be generated by running: artmsWriteConfigYamlFile(config_file_name = "metab_config.yaml"). The relative quantification is performed by running:

artmsQuantification(yaml_config_file = "metabConfig.yaml")