This chapter provides a description of Solaris Flash sections, keywords, and keyword values. Also, the chapter describes the flar command options.Solaris Flash Archive Section Descriptions Solaris Flash Keywords Solaris Flash flar Command Each Solaris Flash archive is grouped into sections. Some sections are generated by the Solaris Flash software and need no input from you. Some sections require input or optionally allow you to add information. The following table describes each section.Section Name Description Required by Archive? Requires Input From User? Archive cookie The first section contains a cookie that identifies the file as a Solaris Flash archive. The deployment code uses the cookie for identification and validation purposes. The cookie must be present for an archive to be valid. Yes No Archive identification The second section contains keywords with values that provide identification information about the archive. The software generates some information such as the following:The archive ID number The method of archival:pax cpio The creation date by default You are required to specify a name for the Solaris Flash archive. Other information that you can specify about the archive includes the following:The author of the archive The date that the archive was created The name of the master system that you used to create the archive For a list of keywords that describe the archive, see Keywords for the Archive Identification Section. Yes Content is generated by both user and the software Manifest A section of a Solaris Flash archive that is used to validate a clone system. The manifest section lists the files on a system to be retained, added to, or deleted from the clone system. The installation fails if the files do not match the expected file set. This section is informational only. The section lists the files in an internal format and cannot be used for scripting. You can exclude this section by creating the differential archive with the flarcreate M option. Because no validation of the archive occurs, excluding this section is not recommended. No No Predeployment, Postdeployment, Reboot This section contains internal information that the flash software uses before and after installing an OS image. Any customization scripts that you have provided are stored in this section. Yes No Summary This section contains messages about the archive creation and records the activities of predeployment scripts. Yes Content is generated by both user and the software User-defined This section follows the archive-identification section. The archive can contain zero or more user-defined sections. These sections are not processed by the archive extraction code. These sections are retrieved separately and can be used for content descriptions. No Yes Archive files The archive files section contains the files that have been gathered from the master system in binary data. This section begins with section_begin=archive, but it does not have an ending section boundary. Yes No Solaris Flash keywords are like custom JumpStart keywords. They define elements of the installation. Each keyword is a command that controls one aspect of how the Solaris Flash software installs the software on a clone system.Use the following guidelines to format keywords and values:Keywords and values are separated by a single equal sign with only one pair per line Keywords are case insensitive Individual lines can be any length Each Solaris Flash archive section is defined by the section_begin and section_end keywords. For example, the archive files section includes a section_begin keyword, though with a different value. User-defined archive sections are delimited by section_begin and section_end keywords, with values appropriate to each section. The values for the section_begin and section_end keywords are described in the following table.Archive Section Value for section_begin and section_end keywords Archive cookie cookie – This section is not delimited by the section_begin and section_end keywords. Archive identification identification User-defined sections section_name – An example of a section_name keyword is X-user_section_1. Archive files archive The following tables describe the keywords for use in the archive identification section and the values you can define for them. Every section uses the keywords in Table 5–3 to delimit each section.Keywords Value Definitions Value Required section_beginsection_end These keywords are used to delimit sections in the archive and are not limited exclusively to the archive identification section. For a description of these keywords, see General Keywords. Text Yes The following keywords, used in the archive-identification section, describe the contents of the archive files section.Keywords Value Definitions Value Required archive_id (optional) This keyword uniquely describes the contents of the archive. This value is used by the installation software only to validate the contents of the archive during archive installation. If the keyword is not present, no integrity check is performed.For example, the archive_id keyword might be FlAsH-ARcHive-2.0. Text No files_archived_method This keyword describes the archive method that is used in the files section. If this keyword is not present, the files section is assumed to be in cpio format with ASCII headers. This format is the cpio c option. If this keyword is present, it has one of the following values:pax – The archive format in the files section is pax with extended tar interchange format. The pax utility enables archiving and extracting files that are greater than 4 GB. cpio – The archive format in the files section is cpio with ASCII headers. If the files_compressed_method is present, the compression method is applied to the archive file that is created by the archive method. Text No files_archived_size This keyword value is the size of the archived files section in bytes. Numeric No files_compress_method This keyword describes the compression algorithm that is used on the files section.If the keyword is present, it can have one of the following values.none – The archive file section is not compressed. compress – The file section is compressed by using the compress command. If this keyword is not present, the archive files section is assumed to be uncompressed. The compression method that is indicated by this keyword is applied to the archive file created by the archive method indicated by the files_archived_method keyword. Text No files_unarchived_size This keyword defines the cumulative size in bytes of the extracted archive. The value is used for file-system size verification. Numeric No The following keywords provide descriptive information about the entire archive. These keywords are generally used to assist you in archive selection and to aid in archive management. These keywords are all optional and are used to help you to distinguish between individual archives. You use options for the flarcreate command to include these keywords. For details, see Example 3–9.Keywords Value Definitions Value Required creation_date This keyword value is a textual timestamp that represents the time that you created the archive.You can use the flarcreate command with the i option to create the date. If you do not specify a creation date with the flarcreate command, the default date is set in Greenwich mean time (GMT). The value must be in ISO-8601 complete basic calendar format without the time designator (ISO-8601,§5.4.1(a)). The format is CCYYMMDDhhmmss. For example, 20000131221409 represents January 31, 2000, 10:14:09 p.m. Text No creation_master This keyword value is the name of the master system you used to create the archive. You can use the flarcreate m option to create this value. If you do not specify a value, the value is taken from the uname n command. Text No content_name This keyword identifies the archive. The value is generated from the flarcreate n option. Follow these guidelines when you create this value:The descriptive name can be no longer than 256 characters. The description should contain the function and purpose of the archive. Text Yes content_type This keyword value specifies a category for the archive. You use the flarcreate T option to generate the value. Text No content_description The keyword value describes the contents of the archive. The value of this keyword has no length limit. You use the flarcreate E option to create this value. Text No content_author This keyword value identifies the creator of the archive. You use the flarcreatea option to create this value. Suggested values include the full name of the creator and the creator's email address. Text No content_architectures This keyword value is a comma-separated list of the kernel architectures that the archive supports. If the keyword is present, the installation software validates the kernel architecture of the clone system against the list of architectures that the archive supports. The installation fails if the archive does not support the kernel architecture of the clone system. If the keyword is not present, the installation software does not validate the architecture of the clone system. Text list No The following keywords also describe the entire archive. By default, the values are filled in by uname when the flash archive is created. If you create a flash archive in which the root directory is not /, the archive software inserts the string UNKNOWN for the keywords. The exceptions are the creation_node, creation_release, and creation_os_name keywords.For creation_node, the software uses the contents of the nodename file. For creation_release and creation_os_name, the software attempts to use the contents of root directory /var/sadm/system/admin/INST_RELEASE. If the software is unsuccessful in reading this file, it assigns the value UNKNOWN. Regardless of their sources, you cannot override the values of these keywords.Keyword Value creation_node The return from uname n creation_hardware_class The return from uname m creation_platform The return from uname i creation_processor The return from uname p creation_release The return from uname r creation_os_name The return from uname s creation_os_version The return from uname v In addition to the keywords that are defined by the Solaris Flash archive, you can define other keywords. The Solaris Flash archive ignores user-defined keywords, but you can provide scripts or programs that process the archive identification section and use user-defined keywords. Use the following format when creating user-defined keywords: Begin the keyword name with an X. Create the keyword with any characters other than linefeeds, equal signs, and null characters. Suggested naming conventions for user-defined keywords include the underscore-delimited descriptive method used for the predefined keywords. Another convention is a federated convention similar to the naming of Java packages. For example, X-department is a valid name for a user-defined keyword.For an example of using options to include user-defined keywords in the archive identification section, see Example 3–9. Use the Solaris Flash flar command to create a Solaris Flash archive and administer the archive.You can use the flar command with the following options: flarcreate creates an archive flar combine merges two archives flar split breaks an archive into sections flar info checks the structure of an archive Use the flarcreate command to create a Solaris Flash archive from a master system. You can use this command when the master system is running in multiuser mode or single-user mode. You can also use flarcreate when the master system is booted from the following media.Solaris Operating System DVD Solaris Software - 1 CD A Solaris network installation image of the DVD or CDs. The master system should be in as stable a state as possible when you create a Solaris Flash archive. You can create a Solaris Flash archive by using either of these command options:As two words: flar with the create subcommand As one word: flarcreate The syntax of the command is as follows:flarcreate n archive_name [R root] [A unchanged_master_image_dir] [H][I][M][[S]c][t [p posn] [b blocksize]][i date][u section ...][m master][f [list_filename| -] [F][a author][e descr|E descr_file][L cpio] [T type][U key=val ...][x exclude_dir/filename] [y include_dir/filename] [z list_filename] [X list_filename]path/filenameflar combine [d dir] [u section...] [t [p posn] path/filenameflar split [d dir] [u section...] [f] [S section] [t [p posn] path/filename flar info [l] [k keyword] [t [p posn] path/filenameIn the previous command lines, path is the directory in which you want the archive file to be saved. filename is the name of the archive file. If you do not specify a path, flarcreate saves the archive file in the current directory.Option Description Required Options n archive_name The value of this flag is the name of the archive. The archive_name you specify is the value of the content_name keyword. Option for Compression c Compresses the archive by using compress(1). Options for Directories and Sizes R root Creates the archive from the file system tree that begins at the file system specified by root. If you do not specify this option, flarcreate creates an archive from a file system that begins at the root (/) file system. S Omits sizing information in the archive. H Does not generate the hash identifier. Options for Creating a Differential Archive A unchanged_master_image_dir Creates a differential archive by comparing a new system image with the image that is specified by the unchanged_master_image_dir argument. By default, the new system image is root (/). You can change the default with the R option. unchanged_master_image_dir is a directory where the unchanged master system image is stored or mounted through UFS, NFS, or lumount.You can modify the effects of file selection for a differential archive by using the options for contents selection described in the next section of the table. M Excludes the manifest file. When you use this option, no validation occurs on the differential archive. When creating a differential archive, flarcreate creates a long list of the files in the system that are unchanged, are changed, and are to be deleted from the archive. This list is stored in the manifest section of the archive. When the differential archive is deployed, the software uses this list to perform a file-by-file check, ensuring the integrity of the clone system. Use of this option avoids such a check and saves the space that is used by the manifest section in a differential archive. However, you must consider the savings in time and disk space against the loss of an integrity check upon installation. Because no validation occurs, avoid using this option. Options for Contents Selection Use the flarcreate file-exclusion options with caution. If you exclude some directories, others that you were unaware of might be left in the archive, such as system configuration files. The system would then be inconsistent and the installation would not work. Excluding directories and files is best used with data that can easily be removed without disrupting the system, such as large data files. y include_dir/filename Adds to the archive those files and directories that are specified on the command line. This option is used when you have excluded a directory, but want to restore individual subdirectories or files.include_dir/filename is the name of the subdirectory or file to be included. f list_filename Adds files and directories from a list to the archive. list_filename is the full path to a file that contains a list. The contents of the file are added to the file list unless F is specified. The list_filename file must contain one file per line. If you specify a file system with R root, the path to each file must be relative to the alternate root directory or an absolute path. If filename is “-”, flarcreate reads standard input as the list of files. When you use the value “-”, the archive size is not calculated. F Uses only the files in f list_filename to create the archive. This option makes the f list_filename the absolute list, rather than a list that is appended to the normal file list. x exclude_dir/filename Excludes files and directories from the archive. These files and directories are specified at the command line. You can use multiple instances of this option to exclude more than one file or directory.exclude_dir/filename is the name of the directory or file to be excluded. X list_filename Excludes a list of files or directories from the archive. list_filename is the full path to a file that contains the list. The list_filename file must contain one file per line. If you specify a file system with R root, the path to each file must be relative to the alternate root directory or an absolute path. If list_filename is “-”, flarcreate reads standard input as the list of files. When you use the value “-”, the archive size is not calculated. z list_filename Excludes or includes a list of files or directories from the archive. Each file or directory in the list is noted with a plus “+” or minus “-”. A plus indicates an included file or directory and the minus indicates an excluded file or directory.list_filename is the full path to a file that contains the list. The list_filename file must contain one file per line. If you specify a file system with R root, the path to each file must be relative to the alternate root directory or an absolute path. I Override the integrity check. To prevent you from excluding important system files from an archive, flarcreate runs an integrity check. This check examines all files that are registered in a system package database and stops archive creation if any of them are excluded. Use of this option overrides this integrity check. Therefore, avoid the use of the I option. Options for Splitting and Merging Archives d dir Retrieves the sections to copy from dir, rather than from the current directory. u section If you use this option, flar copies the cookie, identification, archive, and section sections. You can specify a single section name or a space-separated list of section names. If you do not use this option, flar copies the cookie, ldentification, and archive sections only. f archive Extracts the archive section into a directory that is named archive, rather than placing it in a file with the name archive. Used for splitting an archive. S section Only copies the section that is named section from the archive. This section is user defined. Used for splitting an archive. Option Used to Copy Files (Archive) L cpio The pax utility is the default copy method. For backward compatibility issues, you can create a cpio archive with the L cpio option. A cpio archive cannot contain individual file sizes greater than 4 GB. Options Used With User-Defined Sections u section Includes section as a user-defined section. To include more than one user-defined section, section must be a space-separated list of section names. d dir Retrieves the section file that is specified with u from dir. Options Used With Tape Archives t Creates an archive on a tape device. The filename argument is the name of the tape device. p posn Use only with the t option. Specifies the position on the tape device for flarcreate to store the archive. If you do not use this option, flarcreate places the archive at the current position of the tape. b blocksize Specifies the block size flarcreate uses when creating the archive. If you do not specify a block size, flarcreate uses the default block size of 64 KB. Options for Archive IdentificationThese keywords and values appear in the archive identification section of the archive. U key=val Includes user-defined keywords and values in the archive identification section. i date Uses date as the value for the creation_date keyword. If you do not specify a date, flarcreate uses the current system time and date. m master Uses master as the name of the master system on which you created the archive. master is the value for the creation_master keyword. If you do not specify master, flarcreate uses the system name that is reported by uname -n. e descr Uses descr for the value of the content_description keyword. You cannot use this option when you use the E option. E descr_file Retrieves the value for the content_description keyword from the descr_file file. You cannot use this option when you use the e option. a author Uses author as the author name in the archive identification section. author is the value for the content_author keyword. If you do not specify an author, flarcreate does not include the content_author keyword in the archive identification section. T type Uses type as the value for the content_type keyword. type is user defined. If you do not specify a type, flarcreate does not include the content_type keyword.